Chosen Solution
Hye ! I have an IPhone 6 plus sent in to me from other shop. When I look around the board, all the VCC_Main cap are removed, the reason this IPhone sent to me is because it keep showing temperature warning even not in hot condition. Before this the IPhone is a water damaged and it already power on, but the only problem is the temperature warning issue. What should I do now ??
Temperature error messages are usually related to either defective NTC’s (negative thermal coefficient thermistors, such as R1308 etc.) or true excess heat caused by another issue on the logic board. The VCC caps have nothing to do with it. Clearly the previous tech was searching for a shorted component on VCC_MAIN. Because this phone was water damaged, it must be properly decontaminated first. If that hasn’t been done, that should be your first priority. After that, check the thermistors and if those look good, you have to start probing all of the main, PMIC and PMU_RF voltages to get a sense of what is wrong with the phone.
Hi,according to your description,the NTC thermistor may be broken due to the water damaged before.
iphone 6s temprature error i change battery i check the chips also but it is not heating much but still showing temprature error tell me what should i do
