Chosen Solution
If you know where to get it pleas leave the link and details with how to find it there. Cheers!
Your best bet - is NOT TO these cheap cams generally do not get updated. Even when they do, is variant dependant, NOT accumulative. V1, V2, V3 are not progressions but different hardware suppliers, so they are not updates, but separate firmware that’s NOT interchangeable. I don’t know specifically about this cam, but this is a clone of the Eken H9 I think, (probably OEM from Eken) and with that cam there’s over 25 variants of the same basic cam All not interchangeable Also the Akaso EK7000 has fake 4k Fake pic resolution for anything over 4mp
usually the firmware download is “zipped” - so you have to uncompress the file, this should be sphost.brn copy that to the root directory of a blank sd card of at least 8gb place into the cam, and turn onit should start the update process - then shut down after a couple of minutes. LEAVE IT OFFREMOVE THE SD CARD and format in a pc - BEFORE you turn the cam back on.go to the menu and reset the cam ( near the last item in the menu) - restart the cam againgo to the menu look at version ( near the last item in the menu) that said . ….. updating these types of cams - Is a bad idea MOSTLY the updates are not improvements, they are for compatibility reasons, different hardware components are used, (- hense the “New firmware”) and likely differs from the hardware in “Your” cam, and you will “brick it” (won’t work) 99% of problems - are because the sd card you have is too slow (or the wrong firmware already)
- you need a FAST WRITE SPEED U1 card
