Chosen Solution HP LaserJet P2015 no longer prints over the network but does work when using a USB cable. I have put the HP LaserJet P2015 on a different network, managed to install it on a PC and Mac but it still won’t print. Any ideas ? hello, Do you get an error code? or an error code on the printer? Did you tried to ping to the IP of the printer?...
Chosen Solution I have the canon sure shot 60 zoom 38-60mm 1:4.5-6.7 and have only used it twice. Suddenly in the midst of using some film it has stopped working. There is an E sign next the battery and where normally it would show how much film there is. Also when I turn it off the lens makes a quick click noise? I’m not sure what to do. I have tried changing the battery and checked the film but everything seems to be in order except it is refusing to take photos?...
Chosen Solution Hi I have taken the battery out for 30 mins I am also having issues locating the jumper for reset as well if any body can help that would be great in mean time will keep working on it. Kind Regards Daniel Gorman IT Tech / Owner at Fallen Computer Repair Networking Hi, Im guessing that you want to reset the BIOS default settings, if not than the following might not be of any help....
Chosen Solution Basically I Bought a 2ds off of eBay the seller didn’t tell me or put in the description that it didn’t come with an SD card. That didn’t really matter tho because I knew I had one of my old ones. So when I go to put it in I get the write protection thing. I tried fixing it but I ended up breaking it. So my question is should I just buy a new motherboard or attempt to replace the SD slot....
Chosen Solution Hi everyone, I had my 1Tb harddisk working perfectly except when i unplugged accidently. But it used to be fine and was working. Last time i was using 2.0 Targus USB hub with the power of 5.0V 2.6Amp and connected my harddisk to the hub. That was the moment I couldn’t get my disk in mac. I thought it was taking the time to pop up but now I knew that it doesn’t spin at all....
Chosen Solution My phone will not turn on fully after shutting down by itself from a low battery. I came home from work, plugged it in to charge it (which apparently hasn’t worked) and what happens is it will turn on, show the start up screen with the Motorola logo on it but it won’t even make it to the home screen before it goes black and restarts the process all over again....
Chosen Solution I have had my Sky Q connected to HDMI 1 for just over a year. One morning I woke up and nothing would come on. So I moved the hdmi cable to HDMI 2 & 3 and both work no problem. I have tried my PS4 and Switch and stilL nothing showing on HDMI 1. it’s how’s something is connected but no picture. I have tried my Xbox One X and it will show a picture but only at 480p....
Chosen Solution My name is Henry am from Uganda. I have a Yamaha serow 225 I replaced clutch discs but the bike can’t run fast as it could. Tried different mechanics but still no good response what can I do? Hello Henry. My best guess is that the clutch is slipping. Check the clutch lever cable. If the cable is adjusted too tight, it could cause clutch slip. If the problem continues, check the clutch pack for proper assembly and make sure all the parts are present and in the right place....
Chosen Solution I recently fell into the shallow end of my saltwater swimming pool with my iPhone 6S (A1688) in my pocket. I stood up and got it out in probably about 5 seconds, turned it off and wiped it off with a towel and then immediately buried it in a bowl of rice for probably an hour while I researched the best way to handle the situation. Within an hour, I took it out of the rice (not the best solution, apparently) opened it up, removed a very small amount of visible water on the surface of the 2 large IC chips and then surrounded it top, bottom, and sides with silica gel packets, put it in the microwave (don’t worry, I didn’t turn it on) with a small fan directed at it and closed the door almost all the way....
Chosen Solution Please how to fix this problem, do i need to change the LCD or what? its been wet for about 11 seconds @angelolerado it does not matter how long it was exposed. What matters is where it was exposed. In your case you do want to start with a new display. It is possible that this is a shortened component on the motherboard but for now you will have to start somewhere....
Chosen Solution Hello everyone, I recently replaced the glass digitizer on an iPad Mini 2. When the glass is loose from the frame of the iPad, the home button functions as expected, but once the glass is secured in place, the home button stops working. I am assuming it is something to do with the frame pressing against the ribbon cable, but nothing I do to re-position the cable seems to help....
Chosen Solution The hot water system on my Cuisinart started acting up about a week ago. I will fill the water reservoir and it will continue to blink add water, even when full. It’s only when I dispense water and it is almost empty that the light that says water is ready comes on and starts heating. I did do a descale, and now the water ready and the add water just blink back and forth continually....
Chosen Solution I got a xbox one s controller from my friend. I plugged it in and it works, however the shell is extremly damaged and just broken off on the back. On the frame, on of the triggers has broken off. So I basically have a working motherboard and that’s it. I was able to find a new shell, but anyone know where I can get a new frame? For cheap preferably?...
Chosen Solution Yesterday my tablet fell off my bed and now the screen is all cracked and it wont even let me go into it i cant put my password in My screen broke too…. You need to replae the touch screen digitizer a.k.a the top glass… The reason why you cant put ur password in is because the digitizer is broken and that is what translates your touches into a digital signal…....
Chosen Solution When I plug in my wii the power light blinks red. Every time I press the power button it has no effect on it. I have tried press and holding the power, reset, sync, almost every button on the wii. The only thing that I haven’t done is actually tear apart the wii and find out what might of went wrong. So is there anything I can do before I try ripping it open?...
Chosen Solution I cannot click the button anymore since the glue got it stuck. I tried putting acetone on a cotton swab but i didn’t work. I wanna try pouring in some but i’m scared that i might break it. PS: It’s a flashlight but it has the same function as a laser pointer. Update (07/07/2018) Here’s the button Acetone my friend; good luck.
Chosen Solution We’ve been trying to fix this HP Notebook 15-ac141dx (Touch) device that was received by a client in our area. We have confirmed that all onboard hardware works, and have tried booting with minimal hardware to determine the fail points. Currently, the device is booting to a black screen. We are able to access the BIOS, manage TPM settings, and select Boot options, but as soon as we select a boot device, it does not work properly....
Chosen Solution I want to replace the WiFi card with a better one how do I unscrew the back I unscrewed the screws it’s hard to get the back off not trying to hard to break the plastic. Hi, I think that you may be out of luck in trying to replace the WiFi card. Looking at images of the motherboard for the laptop taken from this link there is no removable WIFi card as it appears that the WiFi IC is hard mounted on the motherboard....
Chosen Solution Did you guys count how many magnets are in the iPad Pro 12.9 2020? I would love to know because we knew in 2018 how many magnets there were in that iPad Pro. Is it the same amount as last iPad Pro or different amount this time because of the new Magic Keyboard accessory? There are total 102 magnets.
Chosen Solution How can I disassemble the Controller so that it can allow me to clean the Joystick and repair bad buttons? There should be screws on the back of the controller, if not then idk. If there are screws, im not sure what screwdriver should be used to unscrew it.
