Posts

Chosen Solution The drivers seat is too close to the steering wheel when it is all the way back to its furthest position. How can I move it further back? Move the rails? Move the seat further back on the rails? Since your seat is all the way back and we must assume that your steering column is not adjustable or telescoping, any modification you do to the rails will void any insurance claim in case of accidental death to a driver....

Chosen Solution Just replaced the screen/display-assembly on my iPhone 5s, using these iFixit guides: iPhone 5s Screen Replacement iPhone 5s LCD and Digitizer Replacement Thankfully, it powers up; the home-button works; and the display (mostly) works, also, but with this one, minor flaw: At the bottom of the screen, there are several lines that show up in the “dock,” towards the very, very bottom, (closest to the home-button). It is strange!...

Chosen Solution I want to know how to change my Blu phone name and I was wondering how to do it Usually you just go to Settings –> About Phone –> Device Name Tap the device name and change it there. Also, posting your personal email address is a bad idea. This forum is a top search result in Google, so the entire world can spam the email address. In order to change the name it’s different for this particular phone....

Chosen Solution How do i delete the call history on my BLU DASH 4.0 phone Open “Phone” Tap “Menu” > “Call history” For more details on a call log, tap it To reset the call log, tap “Menu” while viewing “Call history”, and select “Clear call log” Thanks!! For solving a difficult challenge. Just couldn’t seem to get it done after trying everything I could think of…but this method worked.

Chosen Solution How to fix small crack in screen Unfortunately the only real solution to a crack in the screen is replacing the screen. Some of my customers have used glue or that windshield chip filler before, but you would be better off just having a crack in the screen than that because it doesn’t work very well.

Chosen Solution Hello, this is the first time I’ve come to this site but I’ve found it useful already but I still need help. I’ve just tried playing my 3ds and it just keep popping and turning back off after a couple seconds. I think I may have jostled something in the hardware but I don’t know. I do a lot of traveling and have it on me in my backpack all the time so may be I have shaken something loose....

Chosen Solution Where can I find instructions for the removal and replacement for the Lenovo YOGA 730-15IKB 81CU keyboard This model uses a plastic welded keyboard, which requires you to replace the entire palmrest as a unit. In addition, a few of these have a “paired (calibrated)” trackpad, so the whole thing has to be replaced. The problem with these laptops is the part tends to be as much or very close to another used example of the same laptop in many cases so it’s rarely cost effective unless you have a higher end machine with specs that justify the cost....

Chosen Solution how to replace the engine gasket Hi, Here’s a link to the Mazda 323 Protege Bg Repair Manual 89-94 Scroll down and click on Engine SOHC or Engine DOHC (you didn’t specify) to view the procedure to replace the head gasket. For the SOHC engine it starts on p.B1-16. I didn’t check for the DOHC engine but it would be in the index at the start of the section

Chosen Solution Hi My flash is suddenly write protected How can I recover it? Yes I tried, but I could not, It shows me an error , it seems full. Hi @armand, your USB flash drive is probably over it’s lifetime. Each USB flash drive has limited count of maximum writes and after that the flash remains in read only state. It means that you can copy data out but you are not able to write any data on the stick - this is pretty cool because you can safely move your data out without any data loss (reading is not limited)....

Chosen Solution Hi guys, My Macbook adapter is not working. When I plug it on both ends, nothing happens, no light, nothing. I opened it, and tested voltage with a voltmeter at the output of the circuit, at the start of the wire, and it’s 0. It thus seems that the problem is inside the circuit. Here’s a picture of it. Not sure whether it looks normal or not. By now I have cut the cable off the case, and tested with a multimeter voltage at the output of the case....

Chosen Solution Is there a way to turn off an iPad mini 6 without the screen swipe. The screen is broken and I can’t do that. There is not. The only way to turn it off if you cannot swipe the power off is to disconnect the battery internally, or let the battery run out. It’s one of my biggest frustrations with with iOS and I could never figure out why this isn’t an option....

Chosen Solution Hey there, My son’s Switch is missing some of the screws from the console rail. According to the IFixit teardown they are 3.8mm JIS #0 screws. I am looking to buy some but I don’t seem to be able to find any. Does anyone know where to get some or maybe some Phillips screws which also fit? Cheers… Here’s the whole set for $6.59: https://www.ebay.com/itm/For-Nintendo-Sw…

Chosen Solution need new battery cover @moosenp that will depend on what model your Furby is. Vintage or one of the later models. either or, you will have to scour places like ebay.com as well as some of the repair shops like this one may have them.

Chosen Solution After a crash, the drone does not detect its gps / IMU module. There is no apparent damage on the drone, but it can’t detect gps anymore, the gimbal doesn’t move, and the IMU reports an error. With that, the drone motors won’t start. Everything else works. Still can take pictures, make films, etc. Could a gps/IMU module have been broken at impact, but not no physical damage in the outer shell?...

Chosen Solution The grinder grinds the beams, then seems to slowly attempt to make coffee (nothing comes out) then it drops to ground beans into the grounds holder. No coffee/liquid come out, though. I had a similar problem, and solved it by turning the grinder by hand against resistance. Apparently the grinder wasn’t really turning during the cycle and needed to be cleared.

Chosen Solution @jayeff I have an issue where what you described is exactly what is happening. I have a dual boot system with Ubuntu and windows 11, and with GRUB as the bootloader. When I start the computer with the external monitor connected, GRUB shows up on my external monitor, but never on the laptop monitor, which is always a black screen, whether or not the external monitor is connected. However, Fn+F9 doesn’t have any effect....

Chosen Solution My friend cracked the back on his Verizon iPhone 4, and I have replacement backs for a GSM model and a 4S. Is there any way to make one of those work on it? Maybe by removing one or two of the mounting brackets? Thanks. iPhone 4S back panel would fit iPhone 4 CDMA.

Chosen Solution hi .my iphone was droped on water and i try to fix it by open the phone and dry it and clean it but after that when I try to turn the phone on its stuck on the logo apple and turn off and turn on and doing that all the time .what I can do Ziko link you are not telling us how and what you cleaned. The first thing I suggest is that you disassemble the phone using these guides....

Chosen Solution I have Arctic MX-4 on this computer. I have TG pro and Macs Fan Control. TG Pro is a little confusing and honestly it doesn’t work better than Macs Fan Control. So I have replaced the thermal paste twice with the same paste now. I’m having like a hard time to make this time stay under 65C when browsing the internet using Safari. Im thinking about using Grizzly’s Kryonaut....

Chosen Solution So I got my Roccat Kone EMP around a week and a half ago. I got it because it is rly good at drag clicking. So I drag clicked around 50 cps for around an hour or two. But now the mouse can hardly even get 25 cps. I was told I might have clicked so much that it’s less sensitive now. Is there ANY way to fix this?...