Chosen Solution my tablet deleted a photo and I can’t recover it, is it possible to recover it and if so how? Hi @philgreaves Not sure re your tablet but open the Google Photos app and tap Library > Trash and check if the photo is still there. If it is, tap and hold on the photo and the Restore option should appear. It will restore back to where it was deleted from e....
Chosen Solution im trying to replace the fan in my ps4 pro but theres a stripped screw I use a Dremel to make a slot in the screw head and a flat screwdriver to remove the screw. You can even use the same screw when reassembling.
Chosen Solution There seems to be very little space to loosen the alternator which is how i have replaced belts in the past. Here are some instructions from ehow.com and there is a video on ehow that deals with the water pump but touches on the serpentine belt. Here is another one on instructables.com Good Luck to you and watch the knuckle scraping. Looks pretty tight.
Chosen Solution Hi all, I have a late 2013 iMac with a 1Tb Fusion Drive. The computer is slowing down despite clean up efforts with write speeds under 200 and read speeds around 350. I want to replace the 1Tb HDD with a 1Tb SSD. Most of my data storage is being handled by an 8Tb NAS. The question that is bothering me is how do I get the data from the HDD to the SSD without screwing up the Fusion Drive?...
Chosen Solution My internal hard drive needs to be replaced.. How do it? Its a 250GB 5400rpm disc hard drive ( 64bit) Windows 7 Hi Maggie, For physically replacing the hard drive you may find this helpful. https://www.youtube.com/watch?v=LFCLBZBR… Keep in mind you will then need to reload the OS, hardware drivers, programs, etc onto the new hard drive. Best of luck! Nick
Chosen Solution I had broken my laptop display accidentally. Now how can it be fixed? Is it fix at a cheap price or not? typically laptop monitors are pretty straight forward. the most expensive part is usually the monitor itself. if you don’t feel confident enough changing it yourself, you’ll need to take it to a reputable repair place to do it for you. make sure you find a place that offers a warranty on their work....
Chosen Solution How to check if power is going to water intake valve Hi What is the make and model number of the refrigerator? You will need a DMM (digital multimeter) and know how to use it to test for the voltage. Place the meter test probes across the solenoid terminals or between a terminal and the chassis then the voltage should be there when the ice maker is filling or when the water dispenser is being operated depending if there are one or two solenoids....
Chosen Solution How to clean my camera? Since I don’t see a guide on this here to point you to, go here: https://photographypit.com/how-to-clean-… Tells you all about it.
Chosen Solution Liquid was spilt on my laptop. I have already taken back off and battery out. I cleaned all liquid out of there, but I still need to know how to take off the front, so I can clean under that. Hola. Tienes que desarmar todo la computadora, sacar la motherboard e ir cortando los contactos plasticos que sujetan el teclado con el cover, es sumamente sencillo. Saludos
Chosen Solution So, my iPhone4 was perfectly fine until a couple weeks ago. I took it out of my pocket and I discovered that the power button had “sunk” in. It still functions; however, there is no click or resistance when I press it down. I have to push a lot harder in order for it to properly work. I have take then entire phone apart in order to attempt a fix, but I cant figure it out....
Chosen Solution My Sony a6000 camera dropped to the concrete from tripod. The body seems fine but the lens (SELP1650) is stuck in a fully extended position. When I tried to turn it on, it said cannot recognize the lens and the lens is not retracted back. I tried gently push it inside but it didn’t budge. Is there any other way to fix it before I bring it to the repairman?...
Chosen Solution Zif connector came off the motherboard what and how do I reattach it?! Unless you can microsolder, that motherboard is dead. You’d be better off with a motherboard replacement at this point.
Chosen Solution I had my beats solo 2 for 2 years now and the leather on the ear cushion is starting to fall apart from the headphones and I wondering how to take it off and replace so it does ruin the look of the headphone. It’s very simple. The only thing that is holding the ear pad is strong adhesive just put a flat head driver and separate the adhesive and then just start pulling with your fingers it’s kinda heard to explain because it’s all about the feel and knowing how much force to use and peel the ear pads off....
Chosen Solution Hello, i am wondering how the official Samsung phone repair service work? Are there any videos of how they dissasembly the back cover? And how they put the new back cover on? Do they use heating press? I am wondering because i own a repair shop and i have service pack parts. If i assembly the phone same as them, there should be still the warranty of the phone…...
Chosen Solution Is the replacement of the screen similar to the replacement on an IPAD? I saw the tear down procedure for the Surface Rt, but not sure if I have to tear down in order to replace a cracked screen. Microsoft Surface RT Repair click on the teardown and you wil get there.
Chosen Solution I have a only ssd 512gb variant need to upgrade it… I dont know my laptop has a extra port to upgrade or I have to replace old ssd with new one. Hi, , Can’t find a video for how to open a GL63 8RE but here’s a video for a GL63 8RD that may help, at least as far as opening it up so that you can check what options you have....
Chosen Solution The left bumper on my Series controller stopped clicking. The bumper now just squishes and does not record the button press. I’d probably guess that replacing the bumpers would help. iFixit sells replacement bumpers here. There isn’t a repair guide for this, but you can follow this disassembly guide up to the part where the bumper is removed, swap in the new bumper, and then follow the video in reverse to reassemble....
Chosen Solution I plugged in my phone to charge it and walked away, when I came back I noticed it didnt charge at all. I thought it might be the charger so I used another one but still no good. I fiddled with the charger and it worked but I couldnt move the phone. Any ideas? The charging port is damaged. Try cleaning out the charging port to see if there’s any lint stuck not allowing the cable to connect fully....
Chosen Solution I am trying to get my phone to turn on. I havent used it for a couple years. Hi, After a couple of years the battery is most probably depleted beyond recovery and needs to be replaced. If you have a Nokia Lumia 630/635 here’s a link to the ifixit Nokia Lumia 635 Battery Replacement guide. Replacement batteries are available online. Just search for Nokia Lumia 630/635 battery to get results for suppliers....
Chosen Solution I think one of the pins that touches the headset’s connector got pushed in so it doesn’t recognize the headset anymore (does work with rerouting thanks to SoundAbout, but the sound is terrible). Anyway to fix this? Replace or repair the jack? you could replace the headphone jack with a new one, but i dont know a helpfull guide..
