Chosen Solution How to replace circuit board Nikon D5300 Not sure if you were able to do it (being you asked for help a couple years ago) I don’t have a D5300 myself, but I did a teardown of my D500. On mine, there is 4 screws holding the motherboard into the camera, and a whole bunch of ribbon cables linking to other parts. It might get you on the track to do it....
Chosen Solution Hi guys, It’s been a while since I’ve been on the forum since I’ve been busy but it’s nice to be back. An update on some things: The iMac was eventually thrown out as no one wanted it and it was not cost effective to repair it My keyboard (MX keys mini) was broken in transport (The right arrow key mechanism and keycap came off but it still kind of works)....
Chosen Solution My ac vent broke so I need to see how to take dash paneling off of a 2000 Honda civic Kay Guidry, The link’s and pic. below should help in dash/vent removal. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. http://www.clubcivic.com/forum/threads/r… http://www.superhonda.com/forum/f49/how-… http://www.hondacivicforum.com/forum/int… https://www.youtube.com/watch?v=9VzMTE7H…
Chosen Solution Need to reset console because family Security is locking system from any use. Call Microsoft, you can’t unlock it by yourself. I don’t remember the sequence but there is a combo of pressing buttons in order that will disable the family locks… If you do a live chat with Microsoft (free) and say that “I forgot what the pin was” they should tell you how… P.S. If you find out what the order it is let me know… I don’t remember what it was…
Chosen Solution The MacBook hasn’t been dropped or anything, this happened out of nowhere. I tried resetting the NVRAM, Booted In safe mode, complete reset and downloaded the newest update. nothing worked. Hi To see if it’s software try connecting it up to a external display If you get the same results it’s probably software If not it’s a probably a display issue:-) Possibly the screen flex is not making proper contact, press lightly on the bottom of the screen on the protective plastic and see if that stripe in the middle is removed....
Chosen Solution Hi @mayer I am having a similar problem to what Sam reported. My iMac is an A1311 (EMC 2389) – mid-2010 with 21.5" screen. Can you offer any tips on how to solve this issue? (Or whether it is solvable in the first place?) Btw, I have posted a pic of my screen here: https://imgur.com/HokjRey Mayer: raven, I have not seen that type of pattern before. Hook it up to an external monitor and let us know what you get....
Chosen Solution The heat intake of my dryer is discoloured and getting really hot. I know it should be hot but I believe the discolouration means that it is excessive? I’ve checked and cleaned everywhere. Is this a problem? Hi @fritz87 , What is the model number of the dryer? You might want to check the hi limit thermostat to make sure that it is OK and turning off the heater at the correct temp....
Chosen Solution Just wondering if anybody has any other troubleshooting methods to get the button working again, fingerprint sensor works fine Replaced home button extension cable Restored/updated phone tried recalibrating or does anybody know a shop that can transfer the IC etc over to a new home button? The cable hasn’t been ripped and it just stopped working It is possible that the small part under the button is damaged ( I forgot what it is called)...
Chosen Solution This is serial no: T083193ZP A Yamaha RX-V375 I plug it in and the on/off button don’t work Hi @mat1133 Try turning on the receiver in self diagnostic mode with the protection feature disabled to see if it will at least turn on. Press the Tone Control and Info keys (both together) and then whilst still holding them, press the Power key i.e. all 3 now pressed together, and hold all for 3 seconds or longer and check if it turns on....
Chosen Solution wiko sunset2 touchpad line is remove from the board, how can i trace it so that it can work again add your touch pad from your phone………. i try give solution
Chosen Solution How can I charge this camera without using the external charger the requires removal of battery from the device The camera was not designed to be powered directly (doesn’t have a USB port). If you lost the charging cradle and power cord you can find them online. Here’s one - https://www.amazon.com/Canon-PowerShot-S…
Chosen Solution No matter how much or how little paper I put in it keeps jamming and when I put in multiple papers in the tray it takes them all. What should I do? you need to clean the rubber wheels as dust and debris collects on them. Also store the paper with your towels to prevent moisture making the paper sticky. Also pay the extra little bit for the thicker paper....
Chosen Solution I went to the snow this past weekend and ever since then my phone does not want to charge. I am not sure if it got snow inside the charger port or if I broke the charger port. On my way back home it charged okay but when I got home nothing. I would just like to know if I have water damage or if I broke the charger port....
Chosen Solution How do I repair window in front driver side? You may use WD-40 lube spray. I had to pull my window up and down as much as possible! Then I attached the straw that comes with the WD-40. Then I sprayed the tracks and other moving parts heaver than usual. Meanwhile I kept moving it up and down until it was free. Later it successfully began to inch it up....
Chosen Solution Screen comes up saying I need recovery but video is shut off. How do I turn video back on? Go into Setup by powering on the computer and then tapping F2 several times, till you get into Setup. Look around in Setup to see if there is a video option that you can turn on, if it is off. If that doesn’t work, you could try plugging in an external monitor, if you have one available....
Chosen Solution I tried down loading music to my Ipod but first my coputer asked me to reformate so I clicked yes now it does nothing can’t even turn it off. gilbert, try this from here. “Press and hold the Sleep/Wake button and Volume Down button simultaneously for at least eight seconds or until the Apple logo appears. You may need to repeat this step. If the above step did not work, try connecting iPod to a power adapter and plug the power adapter into an electrical outlet, or connect iPod to your computer....
Chosen Solution I need to know how instal distributor of six cilinder engine 1975 @ricardomartinez you did not tell us what size engine this is. Here are the instructions for a 300ci: DISTRIBUTOR Removal 1, Remove the air cleaner. Disconnect the primary wire from the coil. Disconnect the vacuum advance line at the distributor. Remove the distributor cap. 2. Scribe a mark on the distributor body and the cylinder block indicating the position of the body in the block, and scribe another mark on the distributor body indicating the position of the rotor....
Chosen Solution I would like to have 2 SSD and 1 HDD installed inside the iMac, is it possible? what cable do i need to do so? thanks You could also swap out your optical drive for a 2.5” drive but the optical drive port is only SATA II (3.0 Gb/s) unlike your HDD & Auxiliary port (SSD) SATA ports which are both SATA III (6.0 Gb/s).
Chosen Solution Good afternoon ifixit i love the work that you do in enabling one execise power on self. i have question for you, i would like to change my email address on my phones microsoft account since i typed it wrongly so as it does not sync, i am unable to change it. please help thank you There is no way to change your email address and still have access to your emails at that address....
Chosen Solution I have a Dell 1355cnw color laser printer which worked great until I tried printing on photo paper one day. The paper jammed and a piece of it ripped and (I think) is lodged behind the fuser. LCD shows error code 077-900. I have checked support.dell.com and various blogs and it seems like I’m not alone. Tried removing the six screws from the back and that doesn’t work. Only one person said that they had success going in from the front of the printer, but no reply on how he did it....
