Posts

Chosen Solution My macbook had a broken screen and I disassembled it and the T-CON board. I use the below with an external monitor. How to force turn on keyboard light without monitor and T-CON board? Sadly this is just not possible! No different trying to drive a car down the road without its rims. Apple’s design now prevents any options like we could do with the older 2015 and older systems using jumper....

Chosen Solution The real problem is with the bluetooth/WiFi card. It wasn’t working before the system update. and it’s soldered to the ps3 board “hard to be replaced " . i search for any other way to complete the update without replace the chip Did you find a solution bro? you can remove the hard drive and buy a sata to usb adaptor and connect the hard drive to the laptop or pc and transfer the file and reconnect it to the ps3 or you can just put the file on a usb stick and plug it into the ps3 and transfer files for update

Chosen Solution okay ill like to know if there is something wrong with my iphone system or should i buy a new battery. several times this had happen, if my iphone goes down to 6% it wont charge and when it gets to 1% it will die, ill take up to like 1 days to charge and turn on again. now what happen is that i had 2 days charging and it just turn on till the little apple appears and it will turn back down IT WILL DO THIS SEVERAL TIMES....

Chosen Solution how can i online my Nokia n70 when it is offline Lucas, Check the following • Power off the phone, then power it back on. If it is working properly, it should ask “Continue in offline mode yes/no?” • Check SIM card to see if it is properly seated. You may have a damaged SIM card slot? • Check to see which profile your phone is set to. There are a few modes that put the phone offline....

Chosen Solution have a htc one s recently got water damaged worked fine for a day after it was dropped in water suddendly shutted off dont care about the phone just wanna recover my data If you cant get the phone turned on the only way is to get a very expensive tool that will actually read the data from a NAND flash chip. This requires precise desoldering techniques and the equipment alone is $1500+ You can send your phone in for water damage repair service to a company like RockIT Repairs and they can run it through a heated chemical process to try and properly clean your phone....

Chosen Solution Hello. I did it to myself because the power button was not responding well it figured out that dirt might be the problem so i decided to spray just a little bit of sonax electronic component cleaner. After i turned the phone on like half a hour latter i was left with these white water marks on the phone. At first the marks where bigger but became to fade like in the photo....

Chosen Solution Is there a location to repair a broken 12" screen for ms surface 3. my screen is stuck one-way won’t turn what’s wrong with it? Surface Pro 3 screens are extortionate so I hope it doesn’t mean a new LCD my surface pro 3 is just 3 weeks old and it fell broke the screen, where can I repair Look for a Microsoft I had the same problem if it still work they will exchange it ,call them it new ....

Chosen Solution The mode slelector dial on my Nikon D7100 is damaged and I want to replace it. Got the parts already through AliExpress, but can’t get the dial off. All videos I’ve seen (on YouTube) point to removing most of the camera body. Not sure if you resolved it, but it could be a hidden screw under the top label sticker…

Chosen Solution Hi everyone, can you offer any suggestions here please - I have an old phone Sanyo PM8200 which I haven’t used for a long time but it has a lot of important photos on it. The phone still charges and turns on, and but the buttons on the keypad and menu button don’t work so I can’t get into my photos to save them to my pc. I bought a data cable with a USB so that I can plug it into my PC and the PC recognises its plugged in but I can’t seem to get any further....

Chosen Solution I was editing bulk graphics in AutoCAD when a crash occurred. I just unloaded my photo-work done the day before, into the program for further processing and overlay, but after a failure in AutoCAD, I now do not see a few photos. This is impossible, because I didn’t delete them accurately, they combed it out on their own. Can you view the file here, using Autodesk’s online file viewer?...

Chosen Solution I am having problems duplex printing with Epson L380 model. After each page is printed, it says “Multi-page feed error”, then I have to manually press the copy button to get it to print again. I have to print 200-300 pages at once, so this is really inconvenient. I don’t think there is any issue with the hardware because its printing single pages without any problem, just the duplex printing is causing problems....

Chosen Solution How do u take the steering column off? We put it together and the instructions were very in helpful. So we put it together with out all the pieces attached and can’t get it back off. Here are the assembly instructions: http://originalbigwheelparts.com/images/…

Chosen Solution Hi, i’m currently using Haier T5K model and i want to upgrade my laptop RAM with Kingston 8GB 2400MHz DDR4 or any kind of such RAM tools. My laptop properties are i5 series 4GB RAM 2.4 GHz processor . RAM : ADATA DDR3 1600 CL11 . Is my device support DDR4? Moreover, DDR3 is currently installed and its speed is 1600. Can i add DDR3 or DDR4 which has higher speed than DDR3 1600 such as 2400 and so on alongside with current RAM....

Chosen Solution Power lights come on dvd starts but no boot up. Black screen on lights other than power indicator. That is no lights other than power indicator. I have this same problem machine turns on nothing comes on the screen I wondering if this is a board problem? sounds like this might be a memory problem try ejecting the memory and only setting 1 stick of memory into unit.

Chosen Solution So as the title says, every few (anywhere from 1-10) minutes there will be crackling and popping-almost like the audio is being compressed-being outputted through the headphones. It’s temporarily fixed by either pausing the video I’m watching or unplugging and then plugging in my headphones. It is not the fault of my headphones, as I have tried to see if the effect has occured on my GBA and 3DS, and neither have produced said crackling....

Chosen Solution Where can I find a heater element for a go plus hot tub ph50018 Hi @paulawest1 Did you mean Go Plus PH050018? If so there has been a product recall for the tub in the U.K., due to a faulty heater, so I doubt that you will get a replacement heater as it has been removed from sale. Try for a refund instead.

Chosen Solution So my iPad home button needs to be pushed down really hard. That’s the only way will work, when I look at it very closely I noticed that the side of the cover is kind of opening so to me it looks like The adhesive was coming off. What’s the best way of fixing that? I think you might just need to replace the actual button itself, I have experience the same issue with a old iphone 5 and the home button had just worn out....

Chosen Solution Hello, i need your help. i deactivate the left shift key but i cant deactivate the right one. I used the software key for deactivating the left shift. Thank you and in love. The problem you face here is the way the keyboard works is not just a bunch of discreet switches, that would be a lot of wires! Besides a very large chip would be needed to handle all of these inputs....

Chosen Solution Can anyone tell me how can i disable mouse acceleration Hey, Jackie Settings -> System Preferences -> Mouse From this menu you can adjust tracking speed and scrolling speed to achieve your desired settings. I am thinking to try this methodhttps://techanzone.com/how-to-disable-mo…

Chosen Solution None of the buttons on my steering wheel are working, including the horn! But when the car alarm is triggered the horn goes off, so I know it works. How can I find out what’s wrong and try to fix it myself? Ignition button to the side of steering wheel works fine, wipers & blinkers work too, just no buttons! Hi @mkladywendy , There may be a problem in the wiring harness connections between the steering switches and the radio, possibly near the steering column, maybe harness connector M88 (see horn information below)....