Chosen Solution How do I repair the game command problems from my game controller when the joystick controller works good? The flat cable that connects the controller ports board to the motherboard is probably damaged. Either replace it or solder wires to each terminal instead.
Chosen Solution I have a long crack down the middle of my screen and it is chipped in the top how could I fix it? iPhone 6 Screen Replacement Step by step guide to fixing your screen. If you do not feel comfortable doing the repair take it to a store who will… Doing it your self will be cheaper though.
Chosen Solution The joystick on my Canon FS30 camcorder is loose and needs to be replaced or tightened. I can’t change the date which in return won’t allow me to do anything else with the camera. Can someone please help???!!!! Hi Winston. Try fiddling with the joystick some more and see if you can get it to register a few button presses so you can get by the date and time menu....
Chosen Solution how do you clean a cd and cassette player For CD player: Get 99.9% alcohol (not your average 70% alcohol but that will work also) and microfiber cloth. (use cotton swabs as a last resort as they leave fibers) You must be able to see the laser. Lightly dampen the cloth. Be sure to not have it too wet so that it drips. Clean laser GENTLY! It move up and down and can get damaged with too much PRESSURE!...
Chosen Solution I got this portable ssd for a good price, but I would prefer to use it as an internal ssd. Is it possible to open the case? I will receive it in about four days, but it doesn’t seem like there are screws or so. Have you any luck with opening the enclosure? Thanks, Vardan.
Chosen Solution How do I save photos, documents, etc. that are in my phone to the SD Card? you need to go to File manager that is built into your Android phone to manually move existing photos and Documents to the SD card. Usually it is a copy/paste or move option. once that is done, go into the camera app and tell it to store pictures in the SD card moving forward....
Chosen Solution how do i set vales on a Craftsman 17.5 IC OHV riding lawn mower 1.) find out the settings for the valves. The Intake and exhaust valves most likely won’t be the same. 2.) get a feeler gauge set at any automotive parts store (a spark plug gap tool is not the same as a feeler gauge) 3.) get a flat screwdriver and a wrench that is the size of the lock nut on the valve adjustment 4....
Chosen Solution Hi, Yesterday when my mobile was low, I plugged it in to charger. When I checked it after few minutes, the phone was dead. I tried reboot with power and volume buttons, but almost nothing happen. Just the front flashlight started flashing sometimes when phone is plugged in. Tried more chargers, And even charging from PC, the PC didn’t even recognized that phone is plugged in. Tried to charge up over night, nothing....
Chosen Solution I was reparing my iMac, I’ve opened a couple macs before. I accidentally broke the vertical sync cable. What is this cable for? My iMac now turns on but It only boots halfway and turns off. What could the issue be? Is it because of the the vertical sync cable? Or is there something else? If the issue is with the vertical sync cable? Can I buy a replacement vertical sync cable and then install it?...
Chosen Solution Today I replaced the rear housing on my iPhone 6 as the original was bent and badly dented. However, when I took out the battery, both adhesive strips broke immediately, and I had to heat it up with a hair dryer and peel off the battery. But it was very difficult, and the battery got bent near the top. It wasn’t bent very far, maybe 20 to30 degrees. When I was done with replacing the housing I bent the battery back into shape and installed new adhesive strips, and it works fine, it charges, holds a charge well, and shows the percentage....
Chosen Solution So recently I got my hands on a IMac G3, and I’ve been having problems with it turning on. To explain, whenever I hit the power button wither on the keyboard or computer itself, the crt makes the sound of a static discharge/piping sound, and the power light comes on and the edges of the screen light up ever so slightly. However right after turning it on, it immediately powers off, and if I try turning it on again shortly after....
Chosen Solution I have identified that there are 3 missing resistors on my logic board that I assume are part of the fan control circuit, Since the fan is running at full speed and reporting 0RPM. I need to Identify the resistors used. Here is a board with them in place: http://i.imgur.com/fxwTIBW.jpg Here is My Board: http://i.imgur.com/seANFoU.jpg Any Help would be much appreciated Looking at your picture it appears the solder pads where pulled off with the components - Ouch!...
Chosen Solution I have an old LG phone and I would like to transfer the pictures from that phone to my new Galaxy Note 3. Can this be down with some sort of wire or cord? This is simple to transfer from Android to Android. Connect your LG phone to your computer and you can sync your pictures to computer, then connect your Galaxy Note 3 phone to computer and sync pictures to it....
Chosen Solution I need more space on my computer Chromebooks are somewhat notorious for lack of upgradability, and yours is no exception. 64GB is the largest memory option offered for that laptop, so you’re already at the maximum. The eMMC memory used as the ‘hard drive’ is soldered to the motherboard and is not considered upgradeable. Even if you could find a pin-compatible memory chip replacement that had more storage and were able to successfully unsolder the old chip and replace it, there’s no guarantee the operating system would recognize it; that would be a crapshoot as to whether it would or not....
Chosen Solution im unsure where to start do i have to unscrew the back and go from there or are they just clipped in from the front Hi! To change the trackpad buttons you will need to replace the entire palmrest section of your laptop - otherwise you risk damaging the trackpad which you don’t want. Lenovo has a guide (you have to follow it until page 88 (94 in the PDF) - don’t worry, most of that is legal stuff): https://download....
Chosen Solution I cracked the hinge on the LCD, and it no longer flips up or rotates like it should. How do I replace the LCD? Hi Kristen, Follow the guide at this link to replace your LCD screen. Good Luck!
Chosen Solution @steadman5975 sorry to hear that. What this means is that you will have to replace that charging port. The port is available at places like this Here is a decent video about how to replace it. Soldering is involved with this
Chosen Solution I got one of these out of e waste, and decided to restore it. it works fully and the previous owner’s info is on there. I am wondering, is there is a way to bypass or reset the computer’s password so that i have full access to the computer? also to mention i have a windows keyboard so what i can do on the mac may be limited by the keyboard....
Chosen Solution I have MacBook Pro 15” Late 2013 which shut downs randomly (fully black background BUT display backlight on for couple seconds - then switch off completely). I’ve done SMC NVRAM resets - clean (no apps) High Sierra - El Capitan installations - clean up inside everything with compressed air - no liquid damage (all white stickers - even under heatsink and LCD connector) - everything appear to work fine - just that random shutdowns....
Chosen Solution My MacBook Air 2014 keeps on getting close to 100C (when playing not demanding games). Any ideas on how to fix this? (or is it just my macbook’s processor is trash) Will replacing the thermal paste help? Try replacing the thermal paste with Arctic Silver 5 or similar it should help quite a bit with the temperature on the CPU. MacBooks are no good for gaming, they heat up and a lot due to their small heatsinks....
