Chosen Solution I see a guide for replacing the rear panel, but I don’t see one for the front panel. For the front panel you’d need to remove the digitizer to get to the screws holding it on. You’d also need to remove the side rails and the screws holding the front and back together.
Chosen Solution I don’t know if that makes any difference. I have replaced the analog water sensor. I have cleaned out the drain in the bottom of the washer. Neither is working still getting F 21. What do I do now? Call the appliance man? F12 isn’t an easy code to diagnose see this post https://www.fixya.com/support/t4184073-f… find more by searching “Kenmore Elite HE3 F12 error”
Chosen Solution I’ve asked a few questions on ifixit. If anyone want’s to really take a look at my problem, I would be more than happy to pay. Anyway, I always see all these encrypted files on my computer. One file will have hundreds of certificates on it. Below, you can get a small snippet from one of them. Anyway, I was looking at one of them, and it referenced crl....
Chosen Solution Hi. While attempting to repair a loose and disconnected USB charging port, I accidentally punctured one of the two batteries when trying to open the plastic enclosure :( I’ve seen a little spark, a little smoke and a fruity smell. As it remained stable and not showing signs of overheating, I quickly finished opening the enclosure, taped the hole in the battery, disconnected it from the PCB and put it away in a bucket full of baking soda, as it seemed to be swelling slowly....
Chosen Solution Where can I find a Headphone jack replacement fro a macbook pro non-retina ?? (pretty easy to find for retina but not for the unibody A1286 model…) Thanks First please tell us why you think you need it. There may be a simple fix. It’s integrated into the logic board, see step #21 of this guide: MacBook Pro 15" Unibody Mid 2012 Logic Board Replacement
Chosen Solution I have the original home button from a ipad Pro 10.5 which I need to fix onto the new screen, however not sure what needs adhesive tape applied to it. I know the home button bracket needs tape applied to either side but do the following also need it? Does the rubber gasket need tape applied to it to fix the white plastic ring?Does the plastic ring need tape fitted to it so it sticks to the glass?...
Chosen Solution I have just replaced a faulty lightning dock connector. Put the phone back together and the home button is not responding correctly. When I first use the phone the home button seems to work, then it stops working completely. Touch ID works tho. Also, the when the display part of the phone is not fixed and assembled to the main body of the phone, the home button seems to be working correctly all the time....
Chosen Solution So, I was taking apart the disk drive from my Wii U because I was curious as to what it looked like. I had no game inserted. I put everything back together to make sure everything worked. After inserting a disk, I powered it on, and everything was fine except for the disk drive. I couldn’t eject the game from it, and it was making a sort of scratching sound....
Chosen Solution I only have an earbud working pls help ……. You can open them up and see if the wires are still connected, wire damage is usually the culprit. You will likely have to replace them. Apple EarPods Disassembly
Chosen Solution My father in law died and I have his iPod. How can I have it put in my name? I don’t have any of his passwords. If you sync the iPod to iTunes, you can restore the factory settings and apply your own as you wish. If you’re just looking to change its name when it pops up in iTunes, just right click the name in iTunes’ source list and click “rename”....
Chosen Solution So a year ago I modded my tab and now I want to un mod it I feel like you can’t un mod it so I wanted to check here Here is how you do it: Back up your data, obvs.Put the tablet into download mode. Ensure that it is off, then press and hold the power button, the home button, and the volume down button at the same time....
Chosen Solution Door switch.is good thermol fuse is good got to be start switch how do I test switch Testing a start switch Note:Disconnect the power source to your dryer before you conduct this or any other test. Either unplug the unit from the wall outlet, remove the appropriate fuse from the fuse box, or flip the appropriate breaker in the circuit breaker panel. Locate your dryer’s start switch. It will be located under the control console panel on top of your dryer....
Chosen Solution I was wondering what Apple charged for replacing the display for a 15” mid-2014 Macbook Pro? It is out of warranty and very badly scratched! Thanks, Update (11/22/2018) I’ve added a photo, which actually makes it look worse than it is for everyday use. For the most part, I forget the scratches are there whilst I’m using my MacBook, but every now and again it annoys me. As to how it happened?...
Chosen Solution one day some of my keys just stop working tried lots of things how do i fix this or do i get a new keyboard You can remove the keys and check the pins under each one to make sure they connect with the board or remove the keyboard and buy a replacement one but I’m not sure where you would be able to find a replacement.
Chosen Solution hi!! so i accidentally had a water bottle spill inside my backpack and realized about 5 mins later, but the left side of my 2018 macbook pro got the most damage from it leaving a water blotch looking stain and i brought it to my school’s tech people and they opened it up and let it dry for about 4 days and when i got it back- it was way better than before but there was still a small stain in the corner....
Chosen Solution My macbook accidentally got few drops of water on the screen, So I clean it with wipes cause there’s alcohol in the wipes. But ot turned out making bigger stains on my screen like in the picture. I guess the water is not coming inside the screen, maybe it’s just damaging the anti glare layer or something. I tried to remove it with lcd cleaning spray but it won’t go away just making bigger clouds....
Chosen Solution How to open Lumia 720? I see there is no screws on it zero, see if this works for you. Insert the Sim door key in the small hole on the SD door and press it gently. Remove the SD door. Insert the SIM door key to the small hole on the SIM DOOR and press it gently. remove the SIM Door. Unscrew the TORX #2 screw. To release the Display Module, insert an opening tool to the top left corner of the device and slide to the direction shown in the image....
Chosen Solution I installed a new hard drive keep getting this note “ floppy diskette seek failure f1 to continue”. That is where I am stuck. can anyone give me help on what do next? I have read about setup. Do not understand Bious. Floppy diskette failure is not limited to the floppy disk drive. It’s typically indicating that your drive is not being recognized. Meaning your hard drive is either dead, or a cable came loose from the hard drive....
Chosen Solution Need replacement part Trevor Wallis , Click on either of the 2 links below and enter your model # to see price and availability of the dispenser insert. You can also do a search from other suppliers for better pricing perhaps. Good luck. I hope this helped you out, if so let me know by pressing the helpful button. https://www.repairclinic.com/Shop-For-Pa… http://www.searspartsdirect.com/partsdir… Is the liquid detergent dispenser really necessary? I just moved into a house with a Kenmore washer and that little blue tray insert is missing....
Chosen Solution Hi, sorry for the long post, I just included everything I could think of incase it helps. I bought a spares and repairs original gopro hd hero off ebay, listed as just not turning on. I’ve been trying to find out what’s wrong with it but I’ve come to a point where I don’t know what to try next. Here’s what I’ve done so far: When I got it a few days ago I tried plugging it into a 1 amp usb plug....
