Posts

Chosen Solution how to open back of laptop asus n56v ? The palace of scrows ? Hi, Here is a link to a video which shows the dis-assembly of your laptop. Hopefully it is of some help. Update (05/24/2018) Hi, There would be too many pictures to show all the places where to remove screws and where to pry open the laptop between the upper case and the lower case. If you have access to YouTube or if not, try searching for Asus N56V teardown to get results that may help you....

Chosen Solution I try to opened the Sim Card Slot with a needle but it broked inside, is there another way to pull the sim card slot out or is my Sim Card stuck there Forever now. hi, The only option may be to open the phone and remove the motherboard and see if you get at it that way. Here’s the ifixit Motorola Moto G Play (2021) Motherboard Replacement guide that may help....

Chosen Solution I let my camera sit way too long and the batteries corroded. I managed to get the compartment open and two of the batteries out, but the other two (the ones that have the negative end facing out) are stuck in place. Two-part question: 1) How do I get the batteries out, and 2) Once I do (if I do) how do I clean the area to make the camera come back to life?...

Chosen Solution the phone screen touches by its self So there’s actually a few things that can be causing this issue with your device. The primary suspect could be an issue with the phone’s software. Make sure that the device is up to date. If anything else a forced reset of the device can help the issue.The second suspect issue could be overheating or extreme cold. Definitely see if the issue continues if the phone is in a neutral environment....

Chosen Solution I twisted Sony WH-1000XM4 Headphones Swivel by accident and broke it I’ve posted this as an answer as I can’t edit the OP post. I too had this happen and am looking for a fix that isn’t super glue here are some pictures.

Chosen Solution I forgot to take pic of old solenoid need to know how the wires go it is the 3 post solenpod you can look in the manual if you kept it, otherwise look here: https://www.murray.com/na/en_us/support/… otherwise i would see where i can contact customer support

Chosen Solution I am washing 2 bed pillows - Getting error code UE - load is out of balance. Tried removing 1 pillow and adding bath towels to complete the spin load. Cancelled the normal cycle and am using just the rinse and spin cycle. Then removed the towels and added 2 small couch pillows. Nothing is working! Take them to a laundromat or borrow a washing machine before computer controls were put on them....

Chosen Solution my printer displays the message: printer cartridge missing or not detected." I did the usual diagnostics. Nothing worked. Did not buy new cartridges. These were fine yesterday. Herb Try removing the cartridges and wiping the contacts and reinstall. This sometimes clears contact related issues.

Chosen Solution I was at a track meet playing on my tablet but then I dropped it on hard soil. Should I get a new one, or can you help me fix it? can i email you the photos? Tablet doesn’t have a Crack just lines come on the screen When I dropped it I had a kid fix it and they said a wire came loose when I dropped it....

Chosen Solution I have a imac 2011 but the hard drive is mess up can I buy any brand and it would work fine? The brand should not matter as long as the form factor is the same. The 27 inch iMac 2011 uses a 3.5 inch drive. So you’ll want a 3.5 inch replacement drive. If you want to use an ssd, you’ll have to order an adapter/bracket to allow a 2....

Chosen Solution Hi folks. Total newbie here, but have fixed simple problems on a few iphones/ipods and done well so far. Sorry for the poor terminology that you will witness below… Today though… Problem of navigation on the GPS, came down to the F cable/antenna and I bought the part and tools from IFIXIT, followed their awesome tutorial (they should send you a flat head screwdriver in there too, but they don’t, for the record)....

Chosen Solution I cleaned pc and cpu came out when I removed cowel. Now processor is running very fast. @chaosone7 not quite sure about what you are asking. The processor may have come out by accidentally lifting the release lever To replace the processor follow this Installing the Processor NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer. NOTICE: When installing the processor, do not touch any of the pins inside the socket or allow any objects to fall onto the pins in the socket....

Chosen Solution Hello, Recently while following TronicFix I noticed he used a reprogramming tool for the iPhone 11 or something to copy the OEM information of the screen over to the replacement. Now, I haven’t found any good English content about doing it for the 7 and 8. He successfully copied his OEM information into a replacement screen. However, my concern is thus. Have anyone of you done it? and are all replacement parts equal?...

Chosen Solution While watching twitch on the xbox my 50inch vizo home theater E50x-E1 suddenly had no video but had sound also has backlight an i dont know what’s wrong if possible I’d like it fixed recently think the power has been turning off and on to @woflie_ you need to check this with all the input sources (HDMI, coax, Composite etc) This “think the power has been turning off and on to “ will not be T-con board related....

Chosen Solution Hi, I’m trying to replace a iPhone 11 Pro Max charge port and there is this square piece of board that looks like it’s attached to the flex of the charge port. the new charge port flex doesn’t have this piece of board with it. How do you transfer it over? Can you buy this piece of port separately? What does the board do on the flex? Thanks everyone...

Chosen Solution Hi, I just got my screen, back plate, and front camera to replace my iphone 6, however after I put it in, I realized that my iphone 6’s home button was not functioning. I tried replugging in all the flex cables, however that did not fix my cause. So, I decided to put my iphone into recovery mode and when I did that it said that there was a problem and my phone may need to be updated or restored....

Chosen Solution i disassembled a 6s to install a new battery and replace the back camera. it’s been sitting in two pieces for a month or so. when i went to reassemble, everything worked except touch ID. Touch ID worked before. no screen components were changed. the home button works fine and 3utools reports that the home button serial number that the phone expects and the serial number of the button match....

Chosen Solution home screen touch controls , home , previous , multitasking and volume not on screen Hi, With the tablet turned on, use a straightened paperclip to press and hold the recessed reset button in the tablet for about 5 seconds, then release and check if this restores the screen controls. The tablet will shutdown and then restart once the button is released Here’s an image to show where it is located....

Chosen Solution Can anyone tell me if its even possible to fix or is there another way to charge it? bubbiesmommie try this. Hold Windows key and tap x to get into device manager. Click on batteries Right click and delete the battery Reboot, the system should “find” and “re-install” the battery. Then plug it is and see if it charges. If it does not, then you definitely want to try a new cable and a different charger....

Chosen Solution How can I update the ram and SSD and what ones do I need and how do I updated to Catalina Technically this system only supports upto macOS High Sierra (10.13.6) While there are a few hacks which you could use I really don’t recommend them if you are dependent on this system for school or work. You also won’t get many of the major features as there is dependency within the hardware....