Chosen Solution Pls how can I remove bios password on Dell inspiron 910 laptop Hey Ayeoribe Jayeola You can remove and reset your BIOS to its default state by disassembling it and taking out the CMOS battery(the little 3v coin cell on the motherboard). If you need help disassembling it here is a link to a YouTube video to help you https://www.youtube.com/watch?v=syX_HZoI…. Hope this helps Ewald
Chosen Solution how to bypass a password There are several ways, the main one is to gain access to dos from bios. It’s rather complicated for somebody not being practical with it, better bring it to a tech, This is a way to change the password with a USB stick that has the PasswordReset tool downloaded on it. But you would need another windows device to put the file on it....
Chosen Solution Hello, The remote (all 3 buttons) and the microphone stopped functionning on my klipsch R6i headphones. The headphone cord touched a damaged charging cord while charging my iPhone (by the why stop using damaged chargers). I have feeled some electricity shocks in the ears. Since the mic and the remote dont work anymore but the headphones and the sound remain without problems. Do you have any solution for that?...
Chosen Solution I don’t have the manual anymore for this computer, but we went with a new pc and I need to make sure our banking data, etc. is gone for good on this old Mac. I unscrewed a plate at the bottom of the unit that had 3 screws in it and all I can see is 2 thin plastic tabs that can be pulled out, but when you pull on them, nothing is moving....
Chosen Solution so I purchased the Blue advance a5 lte phone and cannot figure out how to remove the back cover of it. the battery is non removeable, but i want to see what kind of a battery it is If it’s non-user removable, then the back most likely doesn’t come off. The battery’s probably a li-ion or li-poly.
Chosen Solution My Maytag series 2000 front load washing machine is leaking water from bottom of the drum. Looks like it is coming from behind the cement block. As pictured below. Cause 1 Drain Pump The drain pump pumps water out the drain hose. If the drain pump is cracked or damaged, or if the bearings are worn out, the drain pump may leak water. The drain pump is not repairable—if the pump is leaking water, replace it....
Chosen Solution Instruction for replacing a charging port on a Samsung S9+ phone. Please refer to this site visual instructions on how to replace the port https://www.youtube.com/watch?v=RTDpDowO…
Chosen Solution Is it possible to change the charging port and if so, is there an easy to follow tutorial? It appears that the port is soldered to the board, along with the fact that disassembling the controller in the first place it difficult and an all in procedure. So there is absolutely no easy way to do it. I’m sure that it can in fact be done, but I think you would be better off buying another controller just because the fact that this procedure is so difficult....
Chosen Solution I have power to the motor. And have checked it with voltmeter. Replaced the resistor. No luck there so I checked the speed control switch and it is melted a little on the connector and there isn’t any resistance on the switch. I tried jumping the switch but nothing happened there either. So now I want to check the connector on the resistor. However I can’t find an help with that....
Chosen Solution Hi all, my friend bought a Go Pro hero 7 brand new back in 2020 but when she arrived home in a remote part of Egypt she found the go pro would not accept or format any SD card (despite other go pros accepting the cards). Due to remote location and with the outbreak of COVID she couldn’t get the go pro to a retailer within 30days of her warranty claim and Go Pro have since refused to accept the device and exchange it for a new one....
Chosen Solution The google play services have stopped and I cannot find information to straighten it out. The error messages are constant and I really can’t do anything on it. Any suggestions Try the following: Update Google Play - sometimes you just need to get the latest version Try to see if Google Play will work in another device other than the tablet. If it does, then it is a compatability issue....
Chosen Solution I just had my iPhone 5’s battery replaced last Saturday and it had been working just fine (battery lasts longer, charging properly) until this morning when I woke up to it drained. I tried plugging it to the wall charger and into my laptop but it won’t show anything - not the “needs to charge” or “charging” signs and it won’t turn on. I tried the reset thing, holding to the power and home button simultaneously for an entire minute and no Apple logo appeared....
Chosen Solution I have replaced the screen (included speaker) and replaced the speaker. The speaker still doesn’t work. I have also replaced the headphone / charging port. The speaker was working before I replaced the screen. Got the screen from here. The speaker was not working before I replaced the headphone jack / charging port though. I replaced the speaker when replacing the headphone / charging ports, since I was already in there....
Chosen Solution Every thing seems to be working fine with the printer from a communication point; however, every 2nd or 3rd piece of paper jams as it is coming out. I have check to ensure no paper is clogging port where paper is being dispensed and cannot understands why it wrinkles. Please advise, Paul you may need to dig a bit deeper. there is a roller that rolls the paper through on most printers....
Chosen Solution Can I tighten the hinges to my hp envy x360 on my own or is it an hp issue? The problem with a lot of consumer laptops from HP is loose hinges are usually caused by the LCD housing being fatigued, and the plastic standoffs may be physically loose/failing so check for that to quickly know for sure - this is not an HP issue; rather a consumer grade issue....
Chosen Solution So it started out as horizontal lines across the bottom. I re-connected the 2 ribbons to the T-Con board, and now I get Vertical lines. I tried doing a software update at the recommendation of Hisense support, but no change. When you turn the tv on the logo is perfect, no lines, then within about 10 seconds the vertical lines fade in and stay. Could it still be a Screen issue if the logo appears perfect?...
Chosen Solution The home button was working fine but suddenly fingerprint stop working and home button too. So I have to use ASSISTIVE TOUCH. Every single home button that I replace the finger is not working. So how can I make the fingerprint working again? @albertoh ,alberto, Info. from the troubleshooting guide link below. As a security feature, your home button’s embedded Touch ID fingerprint sensor is uniquely paired to your iPhone’s logic board at the factory....
Chosen Solution I just bought a broken LCD iPhone 7 from ebay, and the whole panel is messed up. What are the downsides of the cheap ebay screens? I understand color accuracy isnt great, but what else is there? You should be clear that- despite the name- “cheaper” screens aren’t direct copies of the Apple originals. Rather, they’re compatible replacements that have been designed from scratch and- as a result- vary in some respects that have an effect on usability and quality....
Chosen Solution The battery of my Nokia 8 dies after just a few hours, even when I barely use the phone. Is there any way to fix this? Hi @betsyg , Sounds like the battery is failing and needs to be replaced. Even rechargeable batteries have a lifespan Here’s a video that shows how to do this. Replacement batteries are available online. Just search for Nokia 8 battery to get results for suppliers....
Chosen Solution Hi, my phone screen glass broke, I was wondering how could I replace the sole glass. Do I need to apply heat? you can check on youtube but if you are not skilled or experienced in lcd refurbishing i would leave it to someone who is as the newer samsung lcds are very thin and you need some equipment such as a hot plate and special wire to seperate the glue and a laminating machine to apply the oca sheet and polariser and a bubble removing machine to remove air between the lcd and glass and a mould....
