Posts

Chosen Solution I have the rear back taken off the phone and I want to reattach it. My pre-cut adhesive outlines the glass but not the metal camera bump. I ask because the transition from the glass back to the camera bump isn’t flush and the camera bump sits a bit higher (further from the phone’s frame) that the glass panel. Has anyone noticed this? Do you use two layers of adhesive between the camera bump and the frame?...

Chosen Solution I want to know how to charge my ZTE Max Pro phone without using the USB C cable? You would need either a) Qi Wireless Charger and Receiver b) USB-C to USB Micro B adapter so you can use older cables

Chosen Solution I have an iPhone SE 2020 with a cracked lens cover. I am trying to remove and replace that lens cover like I have with an iPhone 8, but I am failing. The lens did not “pop” off as before; all I got off was the metal ring, the lens itself remains firmly (in all caps) affixed to the back shell. I’ve heated, beated, twisted, and prodded, without success....

Chosen Solution my flat panel plasma tv screen is black on left side and orange horizontal lines on right side usually lines on one side means the panel has gone bad. best bet is to contact the manufacturer or local service tech for TV. at this point in time, most plasmas are not worth the cost of repair…even if you’re doing it yourself. best of luck.

Chosen Solution My laptop fell and it no longer flips all the way around I can get it to go to 50 degrees but nothing more. Any steps for replacing/repairing the hinges? There’s did a Broken Toshiba Laptop Hinge provided by https://www.instructables.com. Basically, in that tutorial, you’ll need some tools, including: Cordless DrillDrill IndexHacksaw3 mm coupling nuts3 mm short screwsSmall ScrewdriversVicegrips or vice Check out your computer and make sure choosing the right tools....

Chosen Solution how to timing the car? Oh dear you need the special can locking kit with the tdc locking pins ,Reno’s are a ##&&% to work on I know I got a modus 1.6 its the same set up ,they also use a dephaser cam gear so if it starts to make a rattling sound on start up get it changed , only use synthetic oil and change the filter twice a year because they are so small , buy a can of silicon spray and spray every electrical connection and fuse box ,these things are prone to damp , Hope it helps you ,good luck !...

Chosen Solution Hi Can I use m.2 nvme SSD as usb stick, please suggest any adapter or any kind of hardware. My system motherboard have only one m.2 nvme SSD slot how can I use more than 1 m.2 NVMe SSD Hi I believe you can use a m.2 SSD enclosure to make your m.2 into a form of external storage! Here’s a video that shows you how to do it and explains it really well!...

Chosen Solution My 55” Bravia has an issue where the green light is blinking constantly, as if someone were hitting the remote over and over. Puts itself into demo mode, makes it impossible to use the remote as the input menu keeps popping up. Thought it was the remote but it happens even when the remote batteries are removed. We have an XBox and a Sling AirTV connected to the tv....

Chosen Solution I am a newbie when it comes to Hackintosh and I was curious if I could get Hackintosh on my old Lenovo ThinkPad T420. Is there a guide on how to do this; or is it simply not possible? Hackintosh systems is a very large subject! There are better sites that get into it. I’ll worn you the biggest issue is device drivers. If it supports virtualization, you could try to follow a MacOS virtual machine guide....

Chosen Solution I was being stupid and mistakenly plugged a powered 9v 3.5mm power supply into my HP Chromebook 14’s headphone jack. At first, both speakers and the jack output weren’t working. I restarted my computer and got the built in speakers working again, but when I plug into speakers or headphones, I get a ton of static and feedback, but can hear the output very slightly. If I turn the volume up, I get clicking in addition to the above....

Chosen Solution The Home button on my iPad Air works most of the time, but sometimes pressing it doesn’t wake the device. When this happens, I have to press the button repeatedly or hold it down to wake the device. Can this problem be repaired? Hi, Replacing the button would probably fix your issue. If your device is under warranty this would be a free replacement. Remember to back up your data by means of iTunes or iCloud before attempting any repair or replacement....

Chosen Solution So recently i bought i used phone off someone which had been factory reset. it was all good and all dandy till i got to the connect to Google account. So i dont have the owners contact at all since at the time of buying it everything was good, showed me it worked so there was no need to exchange contacts so we reset it. Now i cant get passed the FRP all i have is the IMEI and really nothing else....

Chosen Solution I used to have no trouble sending photos to my smartphone using the camera’s wifi. Recently this hasn’t been working, with the the camera never getting beyond ‘Start dedicated app on target device’. I’ve updated the Canon Camera Connect app, installed it on other devices and reset the camera’s wifi settings but nothing has worked. Any suggestions as to what would be wrong? I think I figured this out....

Chosen Solution I’m curious about what the inside of this label maker looks like and was wondering if there was a way to take it apart that was relatively simple. This might be helpful in case something goes wrong with it, and so I can see where the batteries go! To disassemble your Brother PT-90 Label-Maker, read the Brother PT-90 Label-Maker Teardown guide.

Chosen Solution Ok I dropped my phone and it cracked but it still worked so I ordered another screen and the screen is just pitch black but my phone is still very functional can get txt and calls and it charges but I cant see any even tried to reboot it could even get the apple symbol to pop up how do I fix it????????????? triple check the connections. shine a bright light at it to see if its the display or back-light (you’ll see some faint colors if its a back-light issue)....

Chosen Solution None of the lights will turn on. It’s currently charging (I think, the light won’t even turn on for that) so I doubt it’s a problem with that. I’ve tried resetting it multiple times and there has been no change. They’re nearly a year old. I used them this morning and they were fine. Help please? This can be one of three issues. Battery Charger port Charger cable Let me know if you need help https://www....

Chosen Solution I obtained a Powerbook 1400 internal Ethernet adapter card and I am looking for instructions on how to install it. There is a small chip card below it that must be removed first. Then by swiveling the Ethernet card, reinstalling the chip card and wiggling the Ethernet card, it can be installed.

Chosen Solution Can I replace the charging port on my Dell venue 7? It is soldered directly onto the logic board. You can solder a new one on or replace the whole board but other then that your options are pretty limited.

Chosen Solution Safe mode came on and now I have no volume and I can’t power down my tablet. The last I heard you put a pin in where earphone goes and hold it This is the second time I had the problem all right it’s very simple turn off your tablet then take something sharp like an earphone or something sharp the end where it would go in in the little hole at the top where you would put the earphone what you do is you put it in you leave it there on the counter 20 pick it up push it back in at the counter 20 as you’re turning it turning it on it should be fine...

Chosen Solution Do you have a video on how to replace the touchscreen for a Dell Inspiron 13 7352? Is there a parts manual for this device? LCD touch re-calibration . Have give me password, thank