Chosen Solution please help me,thank’s Samsung GT-E1282 @dreams disassemble your phone using this guide GT-E1282 Disassembly. Steps missing on that are, you need to turn the logic board over, disconnect the LCD from the connector and replace it.
Chosen Solution I understand it is possible to set up two pumps that work together on the watersystem. I suppose that when one of the pump fails, the other will take over;The combined pumps will give more water pressure Is that correct? How should I setup a two-pump system? Just put 2 pumps in paralell setup. It workshop as you discribed.
Chosen Solution I am trying to connect my phone (via aux input) directly to my speakers. I have the converter to RCA for my woofer. I can get power to the door speakers with a wiring harness. how do i get the signal to my door speakers? (which are not connected to the amp) Okay let me try and get this straight your trying to pretty much have your sound system play straight off your phone but you don’t have a amp to power full range speakers well now this is where I’m confused are you using the cars radio aux to play from your phone or are you trying to bypass the radio?...
Chosen Solution The part of the charger that goes into the laptop bent and broke off due to my being clumsy and allowing the laptop to fall down while it was still plugged in. How do I fix it or do I need to just pay for a new charger? Walmart sells this for $20 https://www.walmart.com/ip/AC-Adapter-Ch… Go to near by computer repair store , may be you find pin of old non working charger, and replace it, or you have to get whole new charger
Chosen Solution Hi, after replacing broken LCD-Display with a new one - i damaged some coils on my logic board - I guess filter L41, L42, L44, L45. Is there a way to fix it or it’s better to throw it in the trashcan?!? Update hi old turkey, because the coils are sticking on the plastic protection. No i don’t have any practice in micro soldering. I’m looking for somebody who knows this kind of problem and has the abilities to fix it....
Chosen Solution I have a Sankyo bird toy that has a pull string mechanism. It is supposed to work like in this video: https://www.youtube.com/watch?v=Yzi_vvtu… While I fixed the music box I can’t understand how to get the wings and eyes to move with the music. Any suggestion on how to fix it? Or alternatively, a contact to Sankyo could be something :) Here it is opened: Hi Vasco, It looks to me like the motion is driven by the gear on the side opposite the music box....
Chosen Solution Something is stuck under my number “1” key. How can I remove keycap. I have been meaning to write a guide for these honestly. All of the keyboards from the MacBook pro 16” 2019 and forward work the same way…. Anyways. You’ll want something thin and firm. I have a dedicated tool for this, but I have used the back end of a fresh plastic spudger when I don’t have that at the ready....
Chosen Solution My reverse lights dont works on my Jeep trying to replace the switch but I can’t locate it for an Automatic transmission, All guides I’ve found are for Manual transmission. Any help will be welcome If you have the 4sp auto 42RLE then the only switch I can find relevant is the Transmission Range Switch.43RLE Bottom left picture switch number 3. Again called a TRS. The other two are input and output switches....
Chosen Solution Hey guys, iOS 12 revamped the voice memo app and I now cant figure out how to quickly test the ear speaker like I always have. Any suggestions? I was curious myself and I tried looking for new techniques online. Couldn’t find any. Finally about a week of exploring the interface I found the solution!!!! Hold down the home button to trigger Siri. Raise it up to your ear and ask a question....
Chosen Solution I bought a used deluxe audio strap from ebay and 1 headphone side isnt connected and constantly falls off, so i went to youtube and saw that i need to tighten the middle screw from behind the padding, but it doesnt get tightened at all, the screw itself looks fine i think so im not sure what to try now, my only other idea is that its related to the metal part that its supposed to be screwing into in the headphone —– edit after some more trying i think it is from the tiny metal part, i cant seem to get the screw to screw into it which i can on the side that is working, is it possible in any way to replace it?...
Chosen Solution Till date I always had Win 7 in 32 & 64 bit flavors and occasionally also xp. Recently I got a 1 tb seagate firecuda and installed win 7 64 bit. However, the 2nd install of the same flavor was awkward (in the first install, after expanding files windows rebooted) because it completed all tasks before rebooting. However, when I tried booting from the newer install, I saw the dreaded message “cannot load winload....
Chosen Solution had to change led mainboard as 47lw5700 board not available, replaced one by 47lw4500 (EAX64290501)instead of 47lw5700. However screen switch on to white , got sound, but no image. when I press input for hdmi, led tv screen still stays white??. Thanks in adv for reply friends @victor89 sounds like you have an incompatible board. I do not believe that you can make this work with the current board....
Chosen Solution Grinder does not come on at all for my bdc650BSS. It has been fully cleaned, descaled, reset, calibrated. I’m not sure where to go from here. It may be the actual motor. LED light will blink or go out occasionally and then we unplug and plug it back in to get it working. Also, we can only make 9 cups of coffee at a time because when we fill it to 12 the LED screen will blink and go out sometimes....
Chosen Solution Having a problem downloading new apps and app updates to my phone, it says I don’t have enough space even though when I check my storage it says I have five GB left on the phones memory, and a little over 13 GB on the micro sd I have in it. if its a android phone make sure its set to install apps on sd card in the settings....
Chosen Solution My Hero 5 black lcd broke and I need to replace it. Do you do it? I am in Brazil but my daughter has my camera. She’s in Bloomington, Indiana. There are two screens, the front screen (black and white) and the back screen (bigger color display). Which one is broken? It’s the back screen that’s broken. Camera is working properly though. @jonasbrazil I do replace these, However some people get these confused for some reason....
Chosen Solution my computer fan is loud noice and speed is high but computer is working Try opening the computer and see if it is dusty, if so, grab you a can of compressed air and clean it out. The fan is running fast because it is more then likely dirty inside…restricting air flow, making the system run hot.
Chosen Solution Is there an after-market set of hinges that would allow for the display to open 180º and lie flat? I have to replace the display assembly anyway and am wanting to use the display in portrait mode. I dont think so as apple is apple and finding stuff like that with out heavy modding is near impossible. If you really need it in portrait mode for some reason get a nice older dell monitor that can rotate 90 degrees so its in portrait mode and just use that instead....
Chosen Solution My wife dropped her iPhone 8 and there was no visible damage but the home button stopped working. I tired a soft reset, hard reset, factory reset, and firmware update. These did not work, so I replaced the home button with no results. So I tried replacing the entire screen along with a home button that I knew worked from use on another phone. Nothing is working and it is becoming extremely frustrating....
Chosen Solution Is there a good way to remove a glass screen protector from a round smartwatch? The glass is lower than the bezel so i can’t easily get underneath. I tried removing it using my fingernail already but the glass protector chipped a little. If don’t want to risk scratching the screen with little bits of glass. Start by trying to lift the screen protector up from each corner. Once it starts coming up, stop pulling from just the corner and move further along the protector as it starts to peel off....
Chosen Solution My Panasonic VX-870 have dust inside the lens, and with luminosity, the dust appear and blur the image. How can I clean dust INSIDE the lens? Thanks! You have to take it apart if you need help just send me pics before you take any screws out!!!!
